SIOUX Mems 3D Pro
Sioux pro 1500m is the brand-new version of CIAS fence system for perimeter protection which since 2012 has been installed in many sites, high-end but not only, with great results besides receiving the awarding of many prestigious prizes.
The system comprises 140 MEMS sensors for each branch, sensitive on the 3 spatial axis, clustered in 7 elements, each cluster made by 1 Master-sensor and 6 Slave-sensors. Each sensor sends to his master-sensor, through a different acquisition channel, its own electric signal relevant to the perceived noise.
Each Master-sensor "knows" the physical status of each sensor of its group of 7, and is therefore able to assign one specific address to every signal received, digitalizing it and transmitting it to the Controller Unit, so that it can perform a full analysis of the whole system.
Via Software the 280 mems sensors are divided into 80 alarm zones - as relays or digital outputs.
REDUNDANCY AND LINE INSULATORS
The new release of SIOUX Pro 1500m introduces a very important feature, that is the possibility of managing up to 1 cutting per each branch, with no loss of functionality by the whole system. This feature is of utmost importance in very high-risk sites.
In fact it is implemented by putting 2 circuits at the end of the 2 branches, so to close the communication loop of the IP network itself in which the Controller is installed.
Moreover, up to 19 insulators can be added per each branch, to make it short-circuit proof in case of cutting of the communication cable.
Technology MEMS fence detection system
Range (m) 350+350
Power 13,8Vdc or PoE
Consumption (mA) 200mA
Communication dry contacts/RS485/IP
Relay outputs 20 + 4 (A, T, F, N)
Software Sioux test
IP grade 65
Temperature °C -40°C+70°C
Number of beams 1
Warranty (years) 6
Memory (events/graphic) 10 years of memory
Weight kg (net single unit) 0,16
Dimensions (cm) 83 x 93 x 33
MTBF (Medium Time Before Failure) (h) 150.000
MTTR (mean time to restore) (mins) 5min
POD (Probability of Detection) 98%
FAR (False Alarm Rates) 3-4 / 700m/ year
Thanks to the ability to process every sensor that makes up the system, it is possible to adapt the response to any type of fence, even with mixed types within the same site. it is possible to adjust the working parameters for each zone, and, inside the zone, for each individual sensor.
the very high probability of detection (pod) and the very low nuisance alarm rate (nar) of this system, are the result of processing, for each of the three accelerometer signals produced by each transducer, according to “fuzzy log.
TOUCH & ZONE™
the installer can easily configure the zones in the field by walking around the perimeter and physically “touching” the sensors to select the beginning and end of each of the available zones. this capability makes it a much more immediate, quick and easy operation, while it is still possible to
configure remotely using the sioux test software.
by exploiting the capabilities of the mems sensors with respect to the acceleration of gravity it is possible to gain information about the position of the accelerometer in free space. during installation the position of the mems accelerometer, whatever it is, will be memorised. if the position alters by more than a pre-set, variable number of degrees (e.g. 5°) it will produce a tamper alarm.this allows sioux to detect possible physical changes in the fence, which probably indicate an attempt to breach or re-position the fence protection system, either when the sensor is removed from the surface of the fence, or when the fence is bent while trying
to break through.
PIN POINT LOCATION
each mems is identified and analysed individually via a specific channel on its master sensor, which knows the exact location of the sensor. each intrusion event will be identified by point with a precision of 1m regardless
of the distance between the sensors.