Newton Plus is the patented active hybrid long range infrared barrier by CIAS; robust and reliable, with an attractive design. It is made up from hybrid tx/rx optic kits which analyzes and detects any possible intrusion. Newton plus is especially useful for protecting single family homes, warehouses facades, roofs, walled areas, parking lots, storage facilities.
D.I.S. (Dual interlaced scanning) TECHNOLOGY 100Hz
Each cell integrates the dual function Transmitter and Receiver, using the D.I.S. technology (Double Interlaced Scanning). The infrared beams are multiplexed and synchronized at the frequency of 100 Hz. The concept of separate transmission and reception has been surpassed cause all optics and towers are completely identical.
DOUBLE AUTOMATIC GAIN CONTROL (A.G.C.)
Double controlled AGC enables compensation for variations in the incoming signal to ensure uninterrupted operation of the protection barrier.
This processing of the signal is performed based on a time curve that differentiates exterior phenomena (weather or others) from intrusion attempts and thereby signiFicantly reduces the number of false alarms.
STATUS ALARMS COLLECTION
Newton Plus is provided with output switches (Alarm, Tamper and Disqualification) on each tower.
This feature simplify the wiring procedure, because it’s possible to choose where to wire the alarms output, according to needs and constrains.
INTEGRATED THERMOSTAT-CONTROLLED HEATING
Condensation and morning dew, humidity in the interior of the tower caused by high air temperature, ice, etc. are all important factors to take into consideration for effective exterior detection. NEWTON PLUS integrates a thermostat-controlled heater on each optic precluding these situations.
Thanks to this feature, Newton Plus is completely immune to glare directly on the receiver from possible powerfull light sources, such as the setting sun or headlights of cars.
Range = 50m, 100m, 200m
Temperature = -25°C to +55°C
Optics orientation = 180°horizontal and +/-10°vertical
Channels = 4
Optical alignment = incorporated in each optic and electronic thanks to buzzer and led
Consumption = 140 mA for each tower (without heaters), 680 mA for each tower (with heaters)
Power supply = 12 Vdc - 220 Vac through optional power supply
Height towers = 1m - 2m - 2.5m - 3m
Special functions = advanced configuration by PC
MANUAL ALIGNMENT WITHOUT SPECIAL TOOLS
Each optic can be aligned manually without using special tools (screw driver, pliers, etc.). The focusing knobs permit rapid and precise alignment of each optic.
The difficulty in aligning a long range infrared barrier does not stem from the correct alignment of the receivers, but mainly from that of the transmitting cellsof the barrier. Thanks to the bi-directional cell technology of NEWTON PLUS, alignment of a receiver tower automatically leads to alignment of the integrated transmitter.
Newton PLUS integrates 3 alignment tools:
- an optical sighting lens in each cell
- a powerfull buzzer whose audio level varies in conjunction with the incoming signal
- LED indicator that allows visualization of the incoming signal
Detection is carried out by 2 adjacent beams avoiding the gap of no-detection typical of the traditional barriers. The lower beam can be configured in time-delayed single-detection mode in order to detect possible intrusions by crawling (advanced configuration by computer). These particular functions provide NEWTON PLUS with a very high detection performance, reducing false Alarm rates.
Some NEWTON fields of use